TWIST-P1-F/TWIST-P1-M
UTP PASSIVE VIDEO TRANSCEIVERS

• Wideband common-mode rejection from extremely low (20 Hz) to high (5 MHz) frequencies test
• High interference immunity from ground loop currents
• Quality colour and B&W video signals of up to 300m of UTP cable when used in combination with another passive
• transceiver TWIST-P1M or TWIST-P1F
• Quality colour and B&W video signals of up to 600m of UTP cable when used in combination with an active transceiver TWIST-R-AUTO-M
• No power required
• Limited lifetime warranty

TWIST-P1-URM-16
16 CHANNEL UNIT - 19’’ 1U RACK

• As above

TWIST-TA-M
ACTIVE VIDEO TRANSMITTER FOR CAT-5 UTPCABLE

• High-quality transmission of video signal at a distance of up to 900m using Cat5 UTP cable
• Discrete three-stage presetting of frequency equalization of video signal in the long line
• Transmitter’s outputs have a lightning & surge protection
• LED indicators for video signal presence and for automatic operation mode
• Fast black level clamping of the video signal
• Use low-voltage power, + 12 V DC
• Limited lifetime warranty

TWIST-R-AUTO-M
ACTIVE VIDEO RECEIVER FOR CAT-5 UTPCABLE

• Wideband common-mode rejection from extremely low (20 Hz) to high (5 MHz) frequencies
• High interference immunity from ground loop currents
• Automatic frequency corrections and automatic adjustment of video signal level
• Receiver’s inputs have a lightning & surge protection
• Quality colour and B&W video signals of up to 500m of UTP cable when used in combination with another passive transceiver TWIST-P1M or TWIST-P1F
• Quality colour and B&W video signals of up to 900m of UTP cable when used in combination with an active transceiver TWIST-R-AUTO-M
• 12Vdc power
• Limited lifetime warranty

TWIST-8RC-AUTO
8-CHANNEL UTP ADAPTIVE AUTOMATIC EQUALIZATION RECEIVER HUB

• High-quality reception of video signals at a distances of up to 900 metres (2952 feet) using Cat5 UTP cable
• Automatic frequency correction of video signal to ensure true colour rendition
• Automatic frequency correction of video signal level to ensure correct brightness levels
• Receiver has built in LED indicators for video signal presence and automatic operation mode
• Fast black level clamping of the video signal
• Receiver’ inputs are galvanically isolated and have built-in ground loop isolation, lightning & surge protection. This protects equipment from damage in harsh industrial applications

TWIST-4PVD
4 CHANNEL POWER SUPPLY PASSIVE RECEIVER HUB

• Provides Class 2 SELV camera power while receiving video transmission and delivering P/T/Z telemetry all over a single 4-pair Cat5e cable
• Standard telecom/datacom structured cabling pinouts per EIA/TIA 568B
• Independently selectable 16,5 VDC or 24 VDC with 0,37 Amp per channel
• Automatic-reset fault protection; transient protection
• Frequency Response DC to 10 MHz
• Individually floating outputs ensure total ground-loop immunity
• Diagnostic LEDs show load/no load, miswires, and overload conditions
• Use with the TWIST-P-PVD transceiver with DC-DC converter at the camera
• Power cameras via UTP over 200 meters distances
• 1U high wall, desk or desk rack-mountable
• Limited lifetime warranty

TWIST-4PVD
PVD Passive Transmitter with DC-DC converter

• Power-Video-Data (PVD) signals are routed via UTP and RJ45
• Supports 12 VDC/0,37 A camera power with on-board DC-DC converter
• Use with TWIST-4PVD, 4-Channel Power Supply Passive Receiver Hub
• Up to 750 ft (225 m) with passive receiver HUBs
• Full interference immunity from ground loop currents
• Frequency Response DC to 10 MHz
• Built-in transient protection
• Limited lifetime warranty