SD CCTV Transceivers

video transmission

PRODUCT SUMMARY

TWIST-P1-F/TWIST-P1-M UTP PASSIVE VIDEO TRANSCEIVERS Wideband common-mode rejection from extremely low (20 Hz) to high (5 MHz) frequencies test High interference immunity from ground loop currents Quality colour and B&W video signals of up to 300m of UTP cable when used in combination with another passive transceiver TWIST-P1M or TWIST-P1F Quality colour and B&W video signals of up to 600m of UTP cable when used in combination with an active transceiver TWIST-R-AUTO-M No power required Limited lifetime warranty
TWIST-P1-URM-16 16 CHANNEL UNIT - 19’’ 1U RACK As above
TWIST-TA-M ACTIVE VIDEO TRANSMITTER FOR CAT-5 UTPCABLE High-quality transmission of video signal at a distance of up to 900m using Cat5 UTP cable Discrete three-stage presetting of frequency equalization of video signal in the long line Transmitter’s outputs have a lightning & surge protection LED indicators for video signal presence and for automatic operation mode Fast black level clamping of the video signal Use low-voltage power, + 12 V DC Limited lifetime warranty
TWIST-R-AUTO-M ACTIVE VIDEO RECEIVER FOR CAT-5 UTPCABLE Wideband common-mode rejection from extremely low (20 Hz) to high (5 MHz) frequencies High interference immunity from ground loop currents Automatic frequency corrections and automatic adjustment of video signal level Receiver’s inputs have a lightning & surge protection Quality colour and B&W video signals of up to 500m of UTP cable when used in combination with another passive transceiver TWIST-P1M or TWIST-P1F Quality colour and B&W video signals of up to 900m of UTP cable when used in combination with an active transceiver TWIST-R-AUTO-M 12Vdc power Limited lifetime warranty
TWIST-8RC-AUTO 8-CHANNEL UTP ADAPTIVE AUTOMATIC EQUALIZATION RECEIVER HUB High-quality reception of video signals at a distances of up to 900 metres (2952 feet) using Cat5 UTP cable Automatic frequency correction of video signal to ensure true colour rendition Automatic frequency correction of video signal level to ensure correct brightness levels Receiver has built in LED indicators for video signal presence and automatic operation mode Fast black level clamping of the video signal Receiver’ inputs are galvanically isolated and have built-in ground loop isolation, lightning & surge protection. This protects equipment from damage in harsh industrial applications
TWIST-4PVD 4 CHANNEL POWER SUPPLY PASSIVE RECEIVER HUB Provides Class 2 SELV camera power while receiving video transmission and delivering P/T/Z telemetry all over a single 4-pair Cat5e cable Standard telecom/datacom structured cabling pinouts per EIA/TIA 568B Independently selectable 16,5 VDC or 24 VDC with 0,37 Amp per channel Automatic-reset fault protection; transient protection Frequency Response DC to 10 MHz Individually floating outputs ensure total ground-loop immunity Diagnostic LEDs show load/no load, miswires, and overload conditions Use with the TWIST-P-PVD transceiver with DC-DC converter at the camera Power cameras via UTP over 200 meters distances 1U high wall, desk or desk rack-mountable Limited lifetime warranty
TWIST-4PVD PVD Passive Transmitter with DC-DC converter Power-Video-Data (PVD) signals are routed via UTP and RJ45 Supports 12 VDC/0,37 A camera power with on-board DC-DC converter Use with TWIST-4PVD, 4-Channel Power Supply Passive Receiver Hub Up to 750 ft (225 m) with passive receiver HUBs Full interference immunity from ground loop currents Frequency Response DC to 10 MHz Built-in transient protection Limited lifetime warranty